The SeisBrace Design Tool - Seismic Bracing Zone of Influence Calculation software – has updated its options for calculating Cp following NFPA 13 (2016) and the referenced ASCE7 Standard.  

The product’s new “Prying factors” in NFPA 13 (2016) is for concrete anchors for seismic brace structural attachment. The product can calculate lateral braces riser braces in both wall and corner conditions and brace loads at wide or narrow angles.

The software is provided free of charge with a registered account on Anvil’s website.

Anvil International

www.seisbrace.com