Registration for 2021 NFPA Business Meeting voting and NFPA Technical Meeting debate and voting is now open. For the second year in a row, these meetings will be held in an electronic format due to COVID-19. These are two separate events. The Business Meeting will include the annual state of the association remarks from NFPA President and CEO Jim Pauley and NFPA Board of Directors Chair Amy Acton, as well as the presentation and voting for the Board of Directors slate of candidates. The Technical Session is where discussion and voting occur on standards up for debate.

Business Meeting Specifics Include the Following:

• Voting for the Board of Directors slate of candidates begins on June 21, 2021 and will run through June 23, 2021 at 5:00 p.m. (EST).
• Voting will be open to NFPA members who have been members for the required 180-day period.
• Register to vote here.

Technical Session Specifics Include the Following:

• The NFPA Board of Directors, at the recommendation of the Standards Council, has approved Temporary NFPA Technical Meeting Convention Rules for 2021. The meeting allows NFPA members and the public to express positions on all Certified Amending Motions (CAMs) as approved by and included in the Report of the Motions Committee and Agenda that are posted effective today.
• Electronic debate opens on June 14, 2021 and will close on June 25, 2021 at 8:00 p.m. (EST). The electronic debate is open to all NFPA members and non-members. There is no need to register to participate in the debate.
• As at all Technical Meetings, each relevant technical committee, correlating committee, and authorized maker of a CAM may provide a position statement, which can be reviewed on the tech session site prior to the start of debate.
• Voting for CAMs opens on June 28, 2021 and closes on July 2, 2021 at 8:00 p.m. EST. Only those that have met the 180-day NFPA membership eligibility requirement and who have registered are eligible to vote for the CAMs.
• Once registered to vote, NFPA members will receive instructions on downloading the designated Technical Meeting app, as well as information on how to electronically vote.
• To participate in this year’s event or for answers to questions, visit nfpa.org/2021techsession

During the Technical Meeting, NFPA members and the public are encouraged to participate in the debate on each CAM by submitting position statements and acknowledging the name and date stamp being supported or countered. All submitted position statements will be posted in a daily report as the debate continues. All participants will be prompted to use an existing NFPA profile or create a profile before submitting position statements.

The standards that have CAMs and that will be subject to debate during this year’s Technical Meeting include the following:

• NFPA 10 Standard for Portable Fire Extinguishers
• NFPA 13 Standard for the Installation of Sprinkler Systems
• NFPA 72 National Fire Alarm and Signaling Code
• NFPA 80 Standard for Fire Doors and Other Opening Protectives
• NFPA 291 Recommended Practice for Fire Flow Testing and Marking of Hydrants
• NFPA 318 Standard for the Protection of Semiconductor Fabrication Facilities
• NFPA 501 Standard on Manufactured Housing
• NFPA 1123 Code for Fireworks Display
• NFPA 1225 Standards for Emergency Services Communications
• NFPA 2001 Standard on Clean Agent Fire Extinguishing Systems

On or around July 6, NFPA will publicly post all results at www.nfpa.org/2021techsession. Any successful CAMs will be forwarded to the responsible committee(s) for ballot (if applicable) and in accordance with the Regulations Governing the Development of NFPA Standards.