ASHRAE Learning Institute (ALI) will offer 21 courses during the 2020 ASHRAE Winter Conference and AHR Expo in Orlando. The conference will be held Feb. 1-5, 2020, and the expo runs from Feb. 3-5.

“Today’s building professionals are required to have an extensive knowledge base to draw from to address the challenges of operational performance in buildings,” said 2019-20 ASHRAE President Darryl K. Boyce, P.Eng. “ALI courses offer practical training on a variety topics to inspire innovative solutions and equip professionals to shape tomorrow’s built environment.”

ALI will offer four full-day seminars and 17 half-day short courses between Saturday, Feb. 1 and Tuesday, Feb. 4, 2020, during the conference.

New ALI courses include the following:

• Guideline 36: Best in Class HVAC Control Sequences
• Save 40% by Complying with Standard 90.1-2019
• Best Practices for Installing DDC Systems
• IgCC and ASHRAE Standard 189.1 Technical Provisions
• Principles of Building Commissioning: ASHRAE Guideline 0 and Standard 202
• Designing for Cold Climates
• V in HVAC – What, Why, Where, How, and How Much

All courses are led by experienced professionals to provide real-world engineering guidance. The complete conference course schedule is as follows:

Feb. 1, 2020

• Commercial Building Energy Audits (6 Hour), Jim Kelsey, Member ASHRAE, BEAP, LEED AP
• Commissioning Process in New and Existing Buildings (6 Hour), Richard Casault, P.E., Member ASHRAE
• Integrated Building Design (6 Hour), Mitchell Swann, P.E., Member ASHRAE
• Air-to-Air Energy Recovery Applications: Best Practice (3 Hour), Paul Pieper, Eng., Member ASHRAE

Feb. 2, 2020

• Guideline 36: Best in Class HVAC Control Sequences (3 Hour), Steven Taylor, P.E., Fellow/Life Member ASHRAE
• Humidity Control I: Design Tips and Traps (3 Hour), Mark Nunelly, P.E., Member ASHRAE, Cx, LEED AP
• Laboratory Design: The Basics and Beyond (3 Hour), John Varley, P.E., Member ASHRAE, HBDP, LEED AP
• Latest in High-Performance Dedicated Outdoor Air Systems (DOAS) (3 Hour), Art Hallstrom, P.E., Fellow/Life Member ASHRAE, BEMP

Feb. 3, 2020

• Advanced Designs for Net Zero Buildings (3 Hour), Charles Eley, P.E., AIA, BEMP, CEM, Member ASHRAE, LEED AP
• Designing and Operating High-Performing Healthcare HVAC Systems (3 Hour), Dan Koenigshofer, P.E., Member ASHRAE, HFDP, MSPH
• High-Performance Building Design: Applications and Future Trends (3 Hour), Tom Lawrence, Ph.D., P.E., Fellow ASHRAE, LEED AP
• Solar PV and Thermal Systems Analysis and Design (3 Hour), Khalid Nagidi, Member ASHRAE, LEED AP and Svein Morner, Ph.D., Member ASHRAE
• Save 40% by Complying with Standard 90.1-2019 (3 Hour), McHenry Wallace, P.E., Member ASHRAE, LEED AP and Joseph Deringer, AIA, Member ASHRAE, LEED AP
• Humidity Control II: Real-World Problems and Solutions (3 Hour), Lew Harriman, Fellow ASHRAE
• Best Practices for Installing DDC Systems (3 Hour), Larry Fisher, Life Member ASHRAE
• IgCC and ASHRAE Standard 189.1 Technical Provisions (3 Hour), Tom Lawrence, Ph.D., P.E., Member ASHRAE, LEED AP and Anthony Floyd, FAIA, Member ASHRAE, LEED AP

Feb. 4, 2020

• Energy Modeling Best Practices and Application (6 Hour), Sam Mason, PE, BEMP, LEED AP BD+C and Erik Kolderup, P.E., Member ASHRAE, BEMP, LEED AP
• Principles of Building Commissioning: ASHRAE Guideline 0 and Standard 202 (3 Hour), Walter Grondzik, P.E., Fellow/Life Member ASHRAE, LEED AP
• Variable Refrigerant Flow Systems: Design and Application (3 Hour), Jocelyn Léger, P.Eng., Member ASHRAE, CEM, LEED AP
• Designing for Cold Climates (3 Hour), Frank Mills, C.Eng., Member ASHRAE
• V in HVAC – What, Why, Where, How, and How Much (3 Hour), Hoy Bohanon, P.E., Member ASHRAE, BEAP, LEED AP

All courses are open for registration and are eligible for Professional Development Hours (PDHs) or Continuing Education Credits (CEUs).

For more information and to register for the ASHRAE Learning Institute course offerings, visit ashrae.org/orlandocourses.